Posted by Nancy C on Saturday, 10 March 2007, at 9:51 p.m.:
In Reply to: Re: Warping a Structo table loom posted by Sharon on Saturday, 24 February 2007, at 12:44 p.m.:
the rewinding person was me and I am too busy to do that right now, with a bunch coming up for summer, but you treat the spools like sections on a sectional beam. Using a bobbin winder won't work since you need more than one end on each spool. They ran 60, 30 and 15 ends depending on the weight of the yarn. You will need a spool rack with as many spools as you want ends per inch and a tension box. I have an AVL warping wheel that I use. Check any good weaving manual or do a google for "sectional warping" if you aren't familiar with this.